日前,美贸易代表办公室(USTR)发布了针对第二批340亿美圆关税扫除清单内商品加征有效期延长的公告,该批扫除清单于2019年3月25日已做第一次扫除,有效期原定于2020年3月25日到期。本次公告决议,将局部商品的扫除有效期自2020年3月25日起,延长一年。
此次扫除公告
美国贸易代表办公室公告地址:
https://ustr.gov/sites/default/files/enforcement/301Investigations/Notice_of_Extensions_for_Exclusions_Expiring_March_2020.pdf
此次触及延长至2021年3月25日的产品
2019年3月25日扫除公告地址:
https://ustr.gov/sites/default/files/enforcement/301Investigations/84_FR_11152.pdf
此次未取得延长有效期的包括19个税号下22个品项的商品,将于2020年3月25日到期后,被移出扫除清单。即2018年7月6日至2020年3月25日期间,这些商品可免加征关税,但从2020年3月25日起,恢复额外加征关税25%。(名单见列表2)
此次取得有效期延长的共触及11项商品,包括2个税号下的完整扫除商品和7个税号下9个品项局部扫除商品。详细如下:
扫除商品列表1
2019年3月25日美方发布301征税340亿清单第二批产品扫除目录 | ||
全部扫除税号 | ||
美国税号 | 详细扫除产品(英文版) | 详细扫除产品(中文参考版) |
8412.21.0045 | ||
8607.21.1000 | ||
局部扫除税号 | ||
美国税号 | 详细扫除产品(英文版) | 详细扫除产品(中文参考版) |
8413.81.0040 | Breast pumps, whether or not with accessories or batteries | 吸乳器,不管能否带有配件或电池 |
8421.21.0000 | Machinery for filtering water, submersible, powered by batteries, manually operated, such machinery designed for use in pools, basins, aquariums, spas or similar contained bodies of water | 潜水用水过滤机械,由电池供电,手动操作,此类机械设计用于水池,水池,水族馆,水疗中心或相似的封锁水体 |
8421.21.0000 | Hand-held ultraviolet water;purifiers,powered by batteries。 | 手持式紫外线水;由电池供电的净化器。 |
8421.22.0000 | Filters designed to remove sulfites from win | 用于去除葡萄酒中亚硫酸盐的过滤器 |
8421.99.0040 | Filter housings,covers,or couplings,the foregoing of steel and comprising parts of machinery or apparatus for filtering liquids | 过滤器外壳,盖子或联轴器,上述钢材,包括用于过滤液体的机器或设备部件 |
8431.49.9095 | Vulcanized rubber tracks. each incorporating cords and cleats of steel,designed for use on construction equipment | 硫化橡胺履带,每根都包合钢丝绳和夹板,设计用于建筑设备 |
8501.10.4020 | Electric motors,AC, permanent split capacitor type, each in a housing with outside diameter of 84 mm or less, with output of 6W or more but not exceeding 16w | 电动机,交流电,永世分高电容器型,每个都在外径为84毫米或以下的外売中,输出功率为6瓦或以上但不超越16瓦 |
8471.70.6000 | Automated data processing storage units (other than magnetic disk drive units), not assembled in cabinets for placing on a table or similar place, not presented with any other unit of a system | 自动数据处置存储单元(磁盘驱动器单元除外),未组装在机柜中放置在桌子或相似场所,未与系统的任何其他单元一同提供 |
9027.90 5650 | Inoculator sets of plastics, each consisting of a plate with multiple wells,a display tray,and a lid;when assembled, the set measuring 105 mm or more but not exceeding 108 mm in width 138 mm or more but not exceeding 140 mm in depth, and 6.5 mm or less in thickness | 接种器塑料组,每个塑料组有多个孔的板,一个展现托盘和一个盖子组成;组装时,该组件的宽度为105毫米或以上但不超越108毫米,深度为138毫米或以上但不超越140毫米,厚度为6.5毫米或以下 |
2019年3月25日美方发布301征税340亿清单第二批产品扫除目录 | ||
美国税号 | 恢复加征25%关税产品(英文版) | 恢复加征25%关税产品(中文参考版) |
8430.31.0040 | 一切商品 | |
8413.70.2004 | Submersible centrifugal pumps,each powered by 36 v motor | 潜水离心泵,毎台由36V电机供电 |
8413.91.9095 | Impellers of plastic designed for centrifugal pumps,each of the foregoing with outside dianeter of 73 mm or more but not more than 74 mm.(described in statistical reporting number 8413.91.9095, effective January 1, 2019; described in statistical reporting number 8413.91.9080, effective prior to January 1, 2019) | 铸铁叶轮外壳;为离心泵设计的塑料叶轮,上述每根外径为73毫米或以上但不超越74臺米。2019年1月1日之前编码:8413.91.9080,1月之后编码:8413.91.9095 |
8413.91.9095 | Impeller housings of cast iron(described in statistical reporting number 8413.91.9095, effective January 1, 2019; described in statistical reporting number 8413.91.9080, effective prior to January 1, 2019) | 铸铁叶轮外壳。2019年1月1日之前编码:8413.91.9080,1月之后编码:8413.91.9095 |
8414.90.4165 | Compressor housings designed for turbochargers | 为涡轮增压器设计的压縮机壳体 |
8421.19.0000 | Salad spinners,of plastics,not electrically powered | 塑料沙拉旋转器,非电动 |
8421.21.0000 | Machinery designed for removing waste from water in saltwater aquariums by injecting air bubbles then filtering such bubbles | 经过注入气泡然后过滤掉气泡来从盐水水族馆的水中去除废物的机械 |
8421.21.0000 | Electronic water oxidizers designed for purifying water for household washing machines | 设计用于净化家用洗衣机水的电子水氧化剂 |
8428.32.0000 | Steel L-shaped bucket elevator,each comprising steel buckets bolted to a steel chain with guide wires and drive system | 钢制L形斗式提升机,每个都包括用栓固定在钢上的钢制支架,带有导丝和驱动系统 |
8439.91.9000 | Rotors designed to agitate paper and water into pulp,of stainless steel, the foregoing comprising parts of machinery for making pulp of fibrous cellulosic materials | 设计用于将纸和水搅拌成不锈钢纸浆的转子,前述包括用于制造纤维状纤维素资料纸浆的机器部件 |
8479.10.0060 | Bituminous pavers, self-propelled, each with a weight exceeding 14.9 metric tons but not exceeding 18.2 metric tons,with working width of 2.4m or more but not over 8.6m | 自行式沥青摊铺机,每个摊铺机的重量超越14.9公吨但不超越18.2公吨,工作宽度为2.4米或以上但不超越8.6米 |
8481.30.9000 | Check valves,of acrylonitrile butadiene styrene(ABS), each weighing 120 g or lesss | 丙烯腈丁二烯苯乙烯(ABS)止回阀,每只重量不超越120 g |
8481.30.9000 | Check valves, of plastics | 塑料止回阀 |
8501.31.5000 | DC motors rated at 739.6 W, each with a housing with external diameter of 85 mm or more but not exceeding 90 mm and weight of 257 g or less | 额定功率为739.6W的直流电机,每个外壳的外径为85mm或以上但不超越90mm,重量力257g或以下 |
8504.32.0000 | Electrical transformers,each with a power handling capacity rating of 1.8KVA,with external dimensions measuring approximately 13.3 cm by 12.7 cm by 11.4 cm | 电力変压器,每个的功率处置才能等级为1.8千伏安,外部尺寸约为13.3厘米×12.7厘米×11.4厘米 |
8515. 11.0000 | Battery powered soldering irons or soldering guns,not over 18 cm in length | 电池供电的烙铁或焊枪,长度不超越18厘米 |
8538.90.6000 | Knos of injection molded plastics | 注塑塑料旋钮 |
8539.90.0000 | Molybdenum foil filament assemblies,designed for use in ultraviolet lamps | 设计用于紫外线灯的钼箔灯丝组件 |
9013. 80.7000 | Thinfilm-transistor, light emitting diode(LED)backlit flat panel liquid crystal display modules, each with an aluminum bezel and a video display diagonal measuring 113 mm or more but not over 339 mm | 薄膜晶体管,发光二极管(LED)背光平板液晶显现模块,每个都带有铝质边框和113毫米或以上但不超越339毫米的视频显现对角线 |
9014.80.2000 | Depth-sounding apparatus with digital display,each designed{ for installation in a 63.5mm hole in dashboard, designed for recreational boating use | 具有数字显现功用的深度丈量设备,每个设计用于装置在仪表板的63.5mm孔中,设计用于休闲划船用处 |
9018.90. 7580 | Restraint packs designed for use with chest compressors, each containing one torso restraint,consisting of a cotton strap which fastens with hook and loop fasteners to the compressor,and one cover for a head stabilizer | 设计用于胸部紧缩机的约束包,每个包合一个躯干约束安装,包括一个用钩环紧固件固定在紧缩机上的棉带和一个用于头部稳定器的盖子 |
9031.80.8085 | Tuners designed to clip onto musical instruments and indicate whether the instrument is in tune | 调音器设计用于夹在乐器上并指示乐器能否合格 版权与免责声明(1)凡本网站注明“来源:TEXRC.NET纺织人才网”的所有文章、图片、报告等资料,其版权均属纺织人才网所有,任何媒体、网站或个人未经本网站协议授权不得转载、链接、转贴或以其他方式复制发布/发表。已与本网站协议授权的媒体、网站,在下载使用时必须注明“稿件来源:TEXRC.NET纺织人才网”,违者本网站将依法追究责任。 (2)转载或引用本网站内容必须是以新闻性或资料性公共免费信息为使用目的的合理、善意引用,不得对本网站内容原意进行曲解、修改,同时必须保留本网站注明的“稿件来源”,并自负版权等法律责任。 (3)对于不当转载或引用本网站内容而引起的民事纷争、行政处理或其他损失,本网站不承担责任。 (4)凡本网站注明“来源:xxx(非TEXRC.NET纺织人才网)”的稿件,均转载自其它媒体、网站与机构,其转载目的在于传递更多信息,并不代表本网站赞同其观点和对其真实性负责,请读者仅作参考,并请自行核实相关内容。 |